Setting The Network Camera Over The Lan - HIKVISION DS-2CD2712F-I Quick Operation Manual

Network Dome Camera· Quick Operation Guide
3 Setting the Network Camera over the
LAN
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC. Then, install the SADP or PCNVR software to search and change
the IP of network camera.
 The following figure shows the cable connection of network
camera and PC:
 Set the IP address of the camera for accessing via LAN.
Steps:
To get the IP address, you can choose either of the following
1.
methods:
 Use SADP, a software tool which can automatically detect
network camera in the LAN and list the device information like IP
address, subnet mask, port number, device serial number, device
version, etc., shown in 0.
Figure 3-1 Wiring over LAN
26