Access Control - AirTies AP-301 User Manual

• Check the Enable WEP Encryption box.
• Depending on which encryption level you choose, enter a network
key in the corresponding field.
• 64-bit hexadecimal encryption : Enter a key of up to 10 hexadecimal
• haracters (0-9 and A, B, C, D, E, F) e.g. "4321abcdef"
• 64-bit ASCII encryption : Enter a key of up to 5 ASCII characters(all
digits and letters) e.g. "sifre"
• 128-bit hexadecimal encryption : Enter a key of up to 26 hexadecimal
characters (0-9 and A, B, C, D, E, F) e.g.
"12a34b56c78d90e123456f7890"
• 128-bit ASCII encryption : Enter a key of up to 13 ASCII characters
(all digits and letters) e.g. "kablosuzsifre"
•You must activate WEP and set the same network key in all the wireless
devices that will communicate with the AP-301.

Access Control

4.5.
To enable Access Control go to "Access Control" under the "WIRELESS"
menu of the AP-301 web interface. In the window that appears, you
can enter the MAC addresses of the devices that are permitted to
access the AP-301. No other device but those permitted can connect
to the AP-301.
18
AirTies AP-301 User Manual