Table of Contents
Advertisement
4. You must activate WEP and set the same network key in all the devices that will
communicate with your AirTies AP-400.
Access Control
4.5.
To enable Access Control, go to "Access Control" under the "WIRELESS" menu of the AP-
400 web interface. In the window that appears, you can enter the MAC addresses of
the devices that are permitted to access the AP-400. No device other than those
permitted can connect to the AP-400.
To add a new user, enter the MAC Address of the device in the "Allowed Clients List" field
and click "Add". The MAC addresses that you enter will be added to the "Allowed Clients
List".
• Click the "Start" button on the lower left corner of your Windows desktop.
• Click "Run". Type cmd in the window that opens and click OK.
• Enter ipconfig /all in the command line.
The "Physical Address" displayed under the
"Wireless Network Connection" is your
computer's MAC address.
18
AirTies AP-400 User Manual
Advertisement
Table of Contents
