Wireless Security Settings; Wpa Security Settings - AirTies AP-301 User Manual

In this window, you will see a list of all the available wireless access points
that the AP-301 bridge can connect to. Check the box next to the
access point you would like to connect to and click "Save".

Wireless Security Settings

4.4.
It is not necessary to configure wireless security to enable wireless
communication. However, due to growing importance of data security,
it is recommended that you choose a suitable security protocol and
configure the AP-301 to use it.
WPA, WPA2 and WEP wireless encryption protocols can be used to
encrypt traffic between the wireless terminals and the AP-301.
MAC Address Filtering allows only the predefined authorized computers
to exchange data with the AirTies AP-301 and blocks access by those
that are not authorized.
For your wireless network security, it is recommended that both MAC
address filtering and one of the wireless encryption protocols WAP,
WAP2, or WEP be activated.

WPA Security Settings

4.4.1
Wi-Fi Protected Access (WPA) is one of the latest and most advanced
wireless encryption standards and provides you with the highest level
of data protection. All AirTies wireless products and the newly introduced
802.11g wireless communication devices support WPA. If you would like
to use WPA in your wireless network, all the wireless terminals in your
network need to support WPA.
Go to "Wireless Security" under the "WIRELESS NETWORK" menu on the
left menu bar of the AP-301 Web interface.
15
AirTies AP-301 User Manual