Related Manuals for Defy 850
Summary of Contents for Defy 850
-
Page 1: Table Of Contents
Owner’s Manual LAUNDROMAIN ELECTRLOGIC 850 CONTENTS LOADING Features AUTOMATIC Accessories WASHING Safety Precautions MACHINE Installation Electrical Installation Loading the Machine Functions of the Controls Programme Selections Time Delayed Start Customising Programmes. Operating Procedure Maintenance Technical Specification Trouble Shooting www.defy.co.za... - Page 2 CONGRATULATIONS You are now the proud owner of one of the finest and most modern washing machines that today’s technology can produce. You and your machine are going to make a great team together. But first it will pay if you really get to know each other. This book will tell you all you need to know about your machine, what it will do and how to do it.
-
Page 3: Machine
SAFETY PRECAUTIONS Do not reach inside the tub while the machine is working. Wait until all motion stops. Before washing, check all clothes for loose buttons and tears. Check pockets for coins, pins or other small articles. Close zips and fasteners. Wash small articles inside a pillow slip. -
Page 4: Installation
INSTALLATION UNPACKING Remove all packaging and dispose of it in a responsible manner. • Open the wash-tub lid and remove all the accessories stored in the drum. • Do not attempt to operate the machine while any of the packaging is still in place. •... - Page 5 INSTALLATION - CONTINUED INLET HOSES Connect the respective inlet hoses to the hot and cold water taps and to the machine’s inlet • fittings. (see sketches below). The hot water inlet is on the left and the cold water inlet on the right.
-
Page 6: Electrical Installation
If the power-cord should ever need replacing, use only a genuine cord available from • the nearest Defy Service Centre. The appliance must be earthed and the manufacturer and seller do not accept responsibility for any damage due to incorrect electrical connection. -
Page 7: Functions Of The Controls
FUNCTIONS OF THE CONTROLS POWER WASH DETERGENT ON / OFF RINSE TEMP. FUZZY HIGH REMAIN HEAVY MED. CONTROL COLD ECONOMY WASH SPIN MIN. F U Z Z Y P O W E R SPIN ONLY START WOOL TIME SMALL HOLD SOAK WASH WATER... -
Page 8: Programme Selections
PROGRAMME SELECTION FUZZY LOGIC PROGRAMME This machine has Fuzzy Logic sensors. These enable it to evaluate each load placed in the drum and to select and modify a wash programme to suit the load. Do not use the FUZZY programme for woollen or delicate garments. POWER To select Fuzzy, simply press the START... -
Page 9: Time Delayed Start
TIME DELAYED START The wash cycle completion time may be delayed by 2 to 48 hours. This feature is particularly useful when you are at work and only want the machine to finish washing just before you arrive home. To cancel the “time Delayed Start” press the power button. Wait five seconds before pressing the power button once more to resume. - Page 10 CONVENIENT SPIN ONLY SELECTION Press the POWER ON pad. START CONTROL Press the CONTROL pad. HOLD SPIN ONLY Press the START HOLD pad. BEFORE ANY OF THE WASH OPTIONS ARE SELECTED YOU MUST FIRST: Insert the power plug into an earthed wall socket and switch on. •...
-
Page 11: Operating Procedure
OPERATING PROCEDURE LOADING DETERGENT Only use detergents specifically designed for top loading automatic washing • machines. Gently pull the detergent drawer open. • Pour the detergent, the quantity of which is dependent on the wash load, into the • detergent drawer and close the drawer. ADDING BLEACH If desired, liquid chlorine bleach may be added •... -
Page 12: Maintenance
MAINTENANCE CLEANING THE EXTERIOR Wipe up any detergent, bleach and other spills as they occur with a soft damp cloth. • Periodically clean the cabinet with a damp warm soapy cloth, rinse and dry. • CLEANING THE interior Clean the interior with 250ml of chlorine bleach mixed with 500ml of detergent. •... -
Page 13: Technical Specification
MAINTENANCE CONTINUED CLEANING THE DRAIN FILTER Place a shallow con- Turn the filter cap in an Pull the filter assembly tainer under the drain- anticlockwise direction. out. filter to collect any residual water spillage. Re-fit the filter along the Tighten the cap by turn- ing it in a clockwise guides ensuring that Clean the drain filter. -
Page 14: Trouble Shooting
TROUBLE SHOOTING Most problems are easily solved if the cause is known. BEFORE CALLING A SERVICE TECHNICIAN PLEASE CHECK THE FOLLOWING: PROBLEM CHECK The machine will not operate at all. Is there a power failure? Has the power pad been pressed? Has the start / hold pad been pressed? Is there water in the tub? There is a restricted or no water supply.
Need help?
Do you have a question about the 850 and is the answer not in the manual?
Questions and answers
Pump is leaking
The manual does not provide specific instructions for fixing a leaking pump on the Defy 850 washing machine. However, general steps to address a leaking pump include:
1. Unplug the Machine – Ensure the washing machine is disconnected from power.
2. Check the Drain Hose – Inspect for cracks or loose connections.
3. Inspect the Pump – Look for visible damage or leaks.
4. Tighten Connections – Ensure all hose clamps and fittings are secure.
5. Replace the Pump – If the pump is damaged, consider replacing it.
If the leak persists, contacting a qualified technician is recommended.
This answer is automatically generated