DeWalt DWMT70786L Instruction Manual page 10

FEATURES
CHUCK
The 3/8" chuck (A) is a quick
change keyless chuck for easy bit
changing.
TRIGGER
The trigger (B) allows the operator
to control the start
and stop of the air tool.
FORWARD/REVERSE SWITCH
The forward/reverse switch (C)
easily accessible with one hand
from the left and/or the right
side of the tool for quick direc-
tional changeover.
HANDLE
This air tool has an
ergonomic grip (D) made of
A
molded thermoplastic elastomer (TPE)
design for improved comfort, slippage
reduction, and better tool control.
AIR INLET
The tool's air inlet (E) located at
the bottom of the handle is used for
connecting an air supply with
a standard 1/4" NPT American
thread.
EXHAUST
The exhaust (G) is located
at the base of the handle and
allows the exhaust to be direct-
ed away from the operator and
working area.
C
SHOCK RESISTANT HOUSING BUMPERS
B
The shock resistant housing bumper (F) provide protection
against housing cracks from accidental drops of the air tool.
10
D
E
G
F