Installing Batteries In The Remote Control - Epson PowerLite Pro Z9870NL User Manual

1 Cable clip slot
2 Cable clip anchor
3 Power cable clip
4 HDMI cable clip
3. Place the open cable clips around the power cord and HDMI cable, but do not lock them.
4. Slide each cable clip onto the anchors and lock the clips onto the power and HDMI anchors as
shown.
To remove the cable clips, open the clips and disconnect the cables. Then pinch the sides of each cable
clip anchor and carefully pull them out of the cable clip slots.
Parent topic:
Related tasks
Connecting to a Computer for HDMI Video
Connecting to an HDMI Video Source

Installing Batteries in the Remote Control

The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Open the battery cover.
Setting Up the Projector
52