Table of Contents
Advertisement
Related references
Projector Feature Settings - Settings Menu
Related tasks
Displaying a Test Pattern
Correcting Image Shape with Point Correction
Correcting Image Shape with Point Correction
You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid.
1. Press the Menu button.
2. Select the Settings menu and press Enter.
3. Select the Geometric Correction setting and press Enter.
4. Select the Point Correction setting and press Enter.
Note: If you see a confirmation message, press Enter.
You see this screen:
5. Select the Point Correction setting and press Enter.
6. Select the number of grid lines to display and press Enter.
Note: If you need to change the color of the grid lines, select the Pattern Color setting and select a
suitable color.
7. Use the arrow buttons on the projector or remote control to move to the point on the grid that you
want to adjust. Then press Enter.
96
Advertisement
Table of Contents
