Table of Contents
Advertisement
Parent topic:
Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive.
Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the flash drive into the wireless LAN module port.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
Using Multiple Projectors
145
Advertisement
Table of Contents
