Table of Contents
Advertisement
Menu
Image
Signal
Settings
Extended
1
Except for custom Gamma settings
2
Except for Black Level setting
Parent topic:
Adjusting the Image Height
If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust
the image height using the projector's adjustable feet.
1. Turn on the projector and display an image.
2. To adjust the image height, or the projector's horizontal and vertical tilt, rotate the front or rear feet to
extend or retract them.
Settings
Color Mode
Color Temp.
Advanced
• Gamma
• RGB
• RGBCMY
Reset
Auto Setup
Geometric Correction
Multi-Projection
Displaying a Test Pattern
1
2
88
Advertisement
Table of Contents
