Advanced Tuning Functions - Icom IC-756PROII Instruction Manual

4
FREQUENCY SETTING

Advanced tuning functions

QUICK TUNING STEP
The operating frequency can be changed in kHz
steps (0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable)
for quick tuning.
q Push [TS] momentarily to display the quick tuning
indicator.
2.4k 2.4k
BW BW
ANT
1
T X T X VFO VFO
qr.qpp.pp
METER
Po
1
w Rotate the tuning dial to change the frequency in
programmed kHz steps.
e Push [TS] again to turn OFF the indicator.
r Rotate the tuning dial for normal tuning if desired.
SELECTING THE 1 Hz STEP
The minimum tuning step of 1 Hz can be used for fine
tuning.
q Turn OFF the quick tuning step.
• " " does not appear.
w Push [TS] for 1 sec. to toggle the 1 Hz tuning step
ON and OFF.
• RIT and/or ∂TX also functions in 1 Hz tuning step when
used.
1
⁄ TUNING STEP FUNCTION (CW/RTTY only)
4
While operating in CW/RTTY, the
able for critical tuning. Dial rotation is reduced to
of normal when the
Push [1/4] to toggle the
AUTO TUNING STEP FUNCTION (AM/FM only)
When selecting AM or FM, the quick tuning step is au-
tomatically selected by the auto tuning step function.
24
Quick tuning indicator
qw:pp
0
SFT SFT
U S B U S B
FIL2 FIL2
CW CW
21.076.50 21.076.50
1
⁄ function is avail-
4
1 ⁄ function is in use.
4
1
⁄ function ON and OFF.
4
SELECTING THE kHz STEP
q Push [TS] momentarily to turn the quick tuning
step ON.
w Push [TS] for 1 sec. to enter the quick tuning step
setting display.
• Selected tuning steps for all modes appear.
AGC AGC
MID MID
VOX VOX
OFF OFF
COMP COMP
OFF OFF
WIDE WIDE
e Select the desired operating mode.
r Rotate the tuning dial to select the desired tuning
step from 0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz.
t Repeat steps e and r to select quick tuning
steps for other modes, if desired.
y Push [EXIT/SET] to exit the setting display.
ANT ANT
2.4k 2.4k
BW BW
1
TX T X VFO VFO
qr.qot.ppp
METER METER
Po Po
1
P.AMP P.AMP
1
VFO VFO
qr.wpt.ppp
ATT ATT
0FF 0FF
AGC AGC
MID MID
VOX VOX
OFF OFF
COMP COMP
OFF OFF
WIDE WIDE
SCOPE SCOPE VOICE VOICE
1
⁄ tuning step OFF
4
1
⁄
4
1/4
OFF
TS TS
SSB SSB CW CW RTTY RTTY AM AM FM FM
1 1 1 1 10 10
(kHz) (kHz)
DEF DEF
1 Hz step indicator
qw:pp
0
SFT SFT
U S B U S B FIL2 FIL2
14.100.00 14.100.00 USB USB
USB USB
FIL2 FIL2
USB USB
1 14.100.00 14.100.00
MEMORY MEMORY SCAN SCAN
1
⁄ tuning step ON
4
1/4
ON