Table of Contents
Advertisement
5/6DS-KTT
10/12DS-KTT
4
OM-KTT-DS
Equipment Description
The KTT-DS are tilting, table-top kettles with direct steam-heated jackets. The one-
piece stainless steel body on each includes a butterfly shaped pouring lip. The kettles
have a 180 emery grit interior finish and a bright semi-deluxe exterior finish.
Every unit requires a remote steam source. The steam supply is controlled by an inlet
valve, and enters the jacket through one support and rotary joint. Condensate leaves
the jacket through the other rotary joint and support. Standard units are ASME shop
inspected, stamped, and registered with the National Board. These kettles operate
efficiently at pressures above five PSI. A safety valve, strainer, steam trap, and check
valve are all required for installation, and may be ordered as optional equipment.
Optional features and equipment include:
•
Higher maximum pressure
•
Lift-off covers
•
Open leg mounting table mounting
The 5/6DS-KTT kettle has a jacket rated for working pressures up to 55 PSI. The
kettle body incorporates a triple reinforced rim. Two tubular steel supports support the
swivel on which the kettle tilts. A leg projects from the bottom of the kettle.
Kettle
Model
Capacity
5 Gal. (20 Qt.)
5DS-KTT
19 liter
6-Gal. (24 Qt.)
6DS-KTT
23 liter
The design makes it easy for one person to tilt the kettle with the tilting handle, even
when the kettle is full.
The 10/12DS-KTT kettle incorporates a triple reinforced rim and a jacket rated for
working pressures up to 50 PSI. Two chrome-plated arms support the trunnions on
which the kettle tilts. The arm that also serves as the steam inlet has an integral
steam control valve.
Kettle
Model
Capacity
10 Gal.
10DS-KTT
(40 Qt.)
38 liter
12 Gal.
12DS-KTT
(48 Qt.)
45 liter
•
•
•
Kettle Body
Kettle Body
Diameter
Depth
12 inches
12 inches
305 mm
305 mm
12 inches
14 inches
305 mm
356 mm
Kettle Body
Kettle Body
Diameter
Depth
14-1/2
16 inches
inches
406 mm
368 mm
16 inches
16 inches
406 mm
406 mm
Bracket inserts
Kettle brush kit
Steam trap assembly
Base
Base Depth
Width
15 inches
15-1/4 inches
381 mm
387 mm
15 inches
15-1/4 inches
381 mm
387 mm
Base
Base Depth
Width
26-3/4
19-3/4 inches
inches
502 mm
680 mm
26-3/4
19-3/4 inches
inches
502 mm
680 mm
Advertisement
Table of Contents
