Installing Your Phone - AEG Voxtel D235 Quick Start Manual

Steadily on: when the wireless headset is charging on the
base.
Single flashing: indicates that the battery is low, the
unit is not on the base, and the headset will emit short
double beeps.
Red Double flashing: indicates that the battery is low while
the headset is in use and short double beeps will be
emitted.
Triple flashing: indicates powering on/off the headset
and three short beeps will be emitted through the
earpiece.
Toggling display: the wireless headset is in registration
Red/blue mode. When the headset is registered successfully, the
headset will beep for around 3 seconds.
6

INSTALLING YOUR PHONE

6.1 Connecting the base station (see P5)
Plug the power supply and telephone line cord into the base station.
Plug the other end of the power adapter into a suitable 230 V AC mains
socket and the line cord into your telephone line socket.
Warning:
Use only the provided adaptor and telephone line cord supplied.
6.2 Installing and charging the batteries (see P6)
Place the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided.
Position the battery compartment cover over the batteries and slide up
to click into place.
Put the handset on the base and charge for 15 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
11