Installing Your Phone - AEG VOXTEL D235 Quick Start Manual

Red
Red/blue
6
6.1
• Plug the power supply and telephone line cord into the base station.
• Plug the other end of the power adapter into a suitable 230 V AC mains
socket and the line cord into your telephone line socket.
Warning:
Use only the provided adaptor and telephone line cord supplied.
6.2
• Place the 2 supplied batteries into the battery compartment with the
polarity markings as shown. Use only the NiMH rechargeable battery
type provided.
• Position the battery compartment cover over the batteries and slide up
to click into place.
• Put the handset on the base and charge for 15 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
AEG Voxtel D235_V3 A6 UK-DE-FR-NL-IT.indd 11
• Steadily on: when the wireless headset is charging on the
base.
• Single flashing: indicates that the battery is low, the
unit is not on the base, and the headset will emit short
double beeps.
• Double flashing: indicates that the battery is low while
the headset is in use and short double beeps will be
emitted.
• Triple flashing: indicates powering on/off the headset
and three short beeps will be emitted through the
earpiece.
• Toggling display: the wireless headset is in registration
mode. When the headset is registered successfully, the
headset will beep for around 3 seconds.

INSTALLING YOUR PHONE

Connecting the base station (see P5)
Installing and charging the batteries (see P6)
11
6/08/2012 11:03:54