10 metre tangled or damaged. hazard zone. Stop the trimmer immedi- ately if you are approached. Warning: The cutting line continues to rotate after the machine has been switched off.
Page 3
3. Stop using the machine while people, espe- cially children, or pets are nearby. 1. Use the trimmer only in daylight or good artificial 4. Only use the trimmer in the manner and for the light. functions described in these instructions.
Page 4
1.00mm size cable, 10 amps 250 volts AC. 2. Ensure the mains voltage suits your product. YOUR TRIMMER IS SUPPLIED WITH AN 3. IMPORTANT! ELECTRIC MAINS CABLE WIRED DIRECTLY The wires in the mains lead are coloured in accor- INTO THE PRODUCT.
Disconnect the mains electricity sup- ply before attempting any maintenance or adjust- ment. 1. Cut with cutting line at an angle using the tip (F). 2. Swing trimmer in and out of the cutting area taking small cuts (F).
(J). 4. Replace spool into spoolholder. Ensure spool is correctly fitted. Remember! Your trimmer is designed to use only nylon line with a maximum diameter of 1.5mm. Use only genuine Husqvarna UK Ltd. nylon line.
(Fig L, M). 4. Inspect the trimmer carefully, especially the parts of the cutting head. 5. If your trimmer is damaged in any way contact your local approved service centre. • Never use a damaged trimmer.
Need help?
Do you have a question about the Trimmer and is the answer not in the manual?
Questions and answers