Table of Contents
Advertisement
Replacement
Note: If you are replacing the Ethernet riser card, ensure that the jumpers on the new card
Replace in the reverse order. When replacing the adapter, ensure that the plate of the
adapter bracket is under the knurled knob and is in contact with the card guide (for a
grounding path) at the top of the adapter bracket.
Note: To avoid having the Ethernet riser card short out against the cover, rock the card
are set the same as on the old card. Refer to "Setting the Ethernet Riser Card
Jumpers" on page 3-26.
toward the front of the machine.
Removal and Replacement Procedures
3-25
Hide quick links:
Advertisement
Table of Contents
