IBM 7012 300 Series Installation And Service Manual page 123

Step 6. Connecting Devices to Standard I/O Ports
Note: There are two 12-inch converter cables shipped with models 320, 32E, and 32H.
Using the customer planning information, Chapter 3 of 7012 300 Series Operator Guide , or
other information supplied by the customer, connect the cables to the standard I/O ports.
Start at the left connector and move to the right to make cabling easier.
As needed, use the cable labels included in the ship group to label the cables. For additional
information about labeling the cables, see Chapter 10 of Diagnostic Information For Micro
Channel Bus Systems .
Models 320, 32E, and 32H:
Power
(not on all models)
Models 340, 34H,350, 355, 360/36T, 365, 370/37T, and
375:
Power
Serial 1
These cables are used to connect 25-pin D-shell connectors to serial ports S1
and S2.
External Diskette
(optional)
Plate
Parallel Port
Ethernet
Serial 2
SCSI Port
Adapter Positions
1 1 2 3 4
Serial 1
Tablet
Serial 2
Adapter Positions
1 2 3 4
Parallel Port Tablet
Mouse
Keyboard
Mouse
Keyboard
System Installation
4-5