RC Logger RC EYE One Operating Instructions Manual page 17

88003RC (mode 2) rudder
Rudder denotes the rotation of the "RC EYE One" around the rudder axis (vertical axis). This movement
either. occurs. unintentionally. due. to. the. speed. torque. of. the. rotors. or. intentionally. as. a. flight. direction.
change. For the "RC EYE One", this movement is not controlled by a tail rotor, but through speed variation
of the individual rotors to each other. The two red rotors show "front".
If.you.move.the.left.control.lever.(figure.2a).to.the.left,.the.RC.EYE.One.will.turn.to.the.left..If.you.move.the.
control lever to the right, the RC EYE One will turn to the right. If the RC EYE One turns slowly to the left in
hover.flight.(direction.of.the.white.arrow),.the.model.must.be.trimmed.with.the.black.trimming.button.(also.
in the counter-direction). Push the trimming button until the RC EYE One no longer turns away to the left.
Figure 2a
17