Setting Your Rinse Options Control; Automatic Second Rinse; Rinse And Spin; Spin Only - Kenmore Automatic Washers Owner's Manual And Installation Instructions

SETTING YOUR RINSE OPTIONS
CONTROL
A second rinse will remove more
detergent residue. It is especially
beneficial if extra detergent has
been used to remove heavy soils.
AUTOMATIC SECOND RINSE
Your washer allows you to add an auto-
matic second rinse to the ULTRA CLEAN
Cycle or PERMANENT PRESS Cycle.
Simply set the RINSE OPTIONS Control
on ,?ND RINSE before you start the
washer. You won't have to come back to
select a second rinse.
ONE 2ND
RINSE RINSE
• •
RINSE AND SPIN
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may find an extra rinse and
spin is needed.
STEP 1. Set WATER LEVEL Control.
STEP 2. Set WATER TEMPERATURE
Control.
STEP 3. Set RINSE OPTIONS Control
to ONE RINSE.
STEP 4. Set SPEEDS Control:
• For fast agitation and spin,
use the HEAVY DUTY setting.
• For slow agitation and spin,
use the EXTRA DELICATE setting.
• For slow agitation and fast spin,
use the REGULAR setting.
STEP 5. Set the Cycle Selector Control
(Timer) Knob to a RINSE setting.
STEP 6. Pull Cycle Selector Control
(Timer) Knob out to start washer.
SHORT--
ULTRA CLEAN lc
SUPER--14'
PREWASH
SOAK
RINSE
SPIN ONLY
A drain and spin may help shorten drying
times for some heavy fabrics or special-
care items by removing excess water.
STEP 1. Set RINSE OPTIONS Control
to ONE RINSE.
STEP 2. Set SPEEDS Control:
• For fast spin, use the HEAVY DUTY
setting.
• For slow spin, use the EXTRA
DELICATE setting.
STEP 3. Set the Cycle Selector Control
(Timer) Knob to a SPIN setting.
STEP 4. Pull the Cycle Selector Control
(Timer) Knob out to start washer.