Table of Contents
Advertisement
displayed on the Temperature station. If this does not happen after 2 minutes, the
batteries will need to be removed from both units and reset from step 1.
4.
In order to ensure sufficient 915 MHz transmission however, this should under good
conditions be a distance no more than 100 metres between the final position of the
Temperature Station and the transmitter (see notes on "Positioning" and "915 MHz
Reception").
When more than one transmitter is to be used
1.
User shall remove all the batteries from the temperature station and transmitters
and wait 60 seconds if setting has been done with one transmitter before.
2.
Insert the batteries to the first transmitter.
3.
Within 2 minutes of powering up the first transmitter, insert the batteries to the
Temperature Station. Once the batteries are in place, all segments of the LCD will
7
Hide quick links:
Advertisement
Table of Contents
