Table of Contents
Advertisement
Storing Components
If you do not install your S4810–ON and components immediately, Dell Networking recommends
properly storing the system and all optional components until you are ready to install them.
WARNING: ESD damage can occur when components are mishandled. Always wear an ESD-
preventive wrist or heel ground strap when handling the S4810–ON and its accessories. After you
remove the original packaging, place the S4810–ON and its components on an antistatic surface.
Follow these storage guidelines:
•
Storage temperature must remain constant ranging from -40° to 158°F (from -40°C to 70°C).
•
Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.
•
Store in a dust-free environment.
Site Preparations
13
Advertisement
Table of Contents
