Washer Cabinet; Changing Vend Price - Kenmore 3948598A Installation Instructions And Use And Care Manual

NOTE: You do not have to disconnect the timer.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Removing Cabinet
1. Unplug washer or disconnect power.
2. Remove 2 screws on console at left and right side on bottom.
A
3.
4.
A. Screws
Pull console forward then tilt it back.
Remove washer cabinet clip on right side under console. Use
screwdriver blade as shown.
NOTE: For additional security, top can be locked to washer
with a lock and key in the hole provided. Screw type lock
available from industry sources.
A. Access panel B. Clip
6. Remove washer cabinet clip inside meter case,
using screwdriver.
7. Pull cabinet up and forward to remove.
Replacing Cabinet
1. Put cabinet in place on washer.
2. Replace clips at top rear of washer cabinet.
3. Put timer back in place in meter case and tighten timer bolts.
4. Replace meter case access panel,
5. Swing console down into place, push toward rear.
6. Replace 2 console screws.
7. Plug in washer or reconnect power.
NOTE: Place all screws and other items removed from coin slide
assembly on a cloth so they will not get lost.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Remove slide mechanism from meter case.
5.
A. Clips C. Screwdriver
B. Clip blade
Open top access panel in meter case. Loosen timer bolts
with Phillips screwdriver and lift timer out of the way.
10