Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits 3-in-1 SENSOR 1. Temperature & Humidity Sensors 5. Mounting Hardware (internal) Includes anchors and screws. Qty Diameter Length 2. Release Lever for Battery Access 1” 3. Mounting Point 3/8" 6. Mounting Bracket 4. Wind Speed Anemometer 7. A-B-C Switch (not shown) ID code that must match displayʼs A-B-C switch to ensure units synchronize.
Features & Benefits Customer Support AcuRite customer support is committed to providing you with Display Unit best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com...
Page 5
Specifications DISPLAY UNIT Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE 17. Record Highs & Lows Button 1. Wireless Sensor Signal Strength Indoor: 32ºF to 122ºF; 0ºC to 50ºC View records for temperature and 2. Low Sensor Battery Indicator Outdoor: 1% to 99% HUMIDITY RANGE humidity.
4. Press the “SET” button to confirm the calibration adjustment. Note: The “ ” 4. Replace the battery cover and product to operate. AcuRite icon remains illuminated next to calibrated values. lower housing of the sensor. recommends high quality alkaline 5.
Care & Maintenance Display Unit Setup Display Unit Care Set the A-B-C Switch Install or Replace Batteries Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep Locate the A-B-C switch inside the 1. Remove the battery compartment away from dust, dirt and moisture.
Troubleshooting Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper Problem Possible Solution placement of both the display unit and the sensor are critical to the accuracy and performance of this product. • Relocate the display unit and/or the 3-in-1 sensor.
Top or Side Mount Weather Forecast 1. Insert the mounting base into the AcuRiteʼs patented Self-Calibrating Forecasting provides your personal forecast hole on the bottom of the sensor. of weather conditions for the next 12 to 24 hours by collecting data from the 2.