Table of Contents
Advertisement
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
FCC Information .................... 2
Features & Benefits: 3-in-1 ....... 3
Features: Display Unit ............ 4
Setup .................................... 6
3-in-1 Sensor Setup ................ 6
Display Unit Setup ................. 7
Questions?
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
model 00623 / 00632 / 00638
Atomic Clock ......................... 8
Set Time, Date & Units ............ 8
Placement Guidelines ............. 9
3-in-1 Sensor Installation ........10
Using the Weather Center ..... 11
Troubleshooting ....................12
Care & Maintenance .............14
Specifications ........................14
Customer Support .................15
Warranty..............................15
Contact Customer Support at
Instruction Manual
Weather Center
Advertisement
Table of Contents
Related Manuals for AcuRite 623
Summary of Contents for AcuRite 623
-
Page 1: Table Of Contents
Instruction Manual Weather Center model 00623 / 00632 / 00638 CONTENTS Atomic Clock ......8 Unpacking Instructions ... 2 Set Time, Date & Units .... 8 Package Contents ....2 Placement Guidelines ..... 9 Product Registration ....2 3-in-1 Sensor Installation ..10 FCC Information .... -
Page 2: Unpacking Instructions
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. -
Page 3: Features & Benefits: 3-In-1
Features & Benefits 3-in-1 SENSOR 6. Mounting Bracket 1. Temperature & Humidity Sensors 7. A-B-C Switch (internal) (not shown) ID code that must match display’s 2. Release Lever for Battery Access A-B-C switch to ensure units 3. Mounting Point synchronize. 4. -
Page 4: Features: Display Unit
Features & Benefits Display Unit... -
Page 5: Back Of Display Unit
DISPLAY UNIT 20. + Button For setup preferences. 1. Date 21. SET Button 2. Low Battery Indicator For setup preferences. 22. Multi-Variable History Chart 3. Atomic Clock Displays the past 12 hours of data for Maintains time with split-second pressure, temperature or wind speed. accuracy and automatically updates for daylight saving time. -
Page 6: Setup
2. Remove the battery units to synchronize. compartment cover. Install or Replace Batteries 3. Insert 4 x AA batteries into AcuRite recommends high quality the battery compartment, as alkaline or lithium batteries for shown. Follow the polarity the best product performance. -
Page 7: Display Unit Setup
Display Unit Setup AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. Set the A-B-C Switch Install or Replace Batteries Locate the A-B-C switch inside 1. Remove the battery the battery compartment. Set compartment cover. -
Page 8: Atomic Clock
Atomic Clock AcuRite atomic clocks use a radio-controlled signal to synchronize to the correct time broadcast by the National Institute of Standards and Technology (NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB broadcasts the current time and date with split-second accuracy. -
Page 9: Placement Guidelines
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents. -
Page 10: 3-In-1 Sensor Installation
3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 4”x4” wood, 3/4” pole, etc. (not included) LEVEL INSTALLATION Use a bubble level (not included) to ensure level installation for accurate wind measurement. -
Page 11: Using The Weather Center
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location. -
Page 12: Troubleshooting
High & Low Records The “MIN/MAX” button displays minimum and maximum recordings for outdoor and indoor temperature and humidity. To view the MINIMUM temperature and humidity readings, press and release the “MIN/MAX” button until the “MIN” icon appears on the display next to the low records. To view the MAXIMUM temperature and humidity readings, press and release the “MIN/MAX”... - Page 13 (see page 9). humidity • Make sure 3-in-1 sensor is mounted at least 5 ft off of the ground. If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
-
Page 14: Care & Maintenance
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. 3-in-1 Sensor Care Clean the Sensor Clean with a soft, damp cloth. -
Page 15: Customer Support
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www. - Page 16 Plan your day with confidence ™ www.AcuRite.com ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology.