Specifications ......16 3-in-1 Sensor Setup ....6 FCC Information .......16 Display Unit Setup ......7 Customer Support ....17 Set Time, Date & Units ....8 Warranty .........17 Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com. SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits 3-in-1 SENSOR 6. Mounting Bracket 1. Temperature & Humidity Sensors Includes anchors and screws. (internal) Diameter Length 2. Release Lever for Battery Access 1” 3. Mounting Point 3/8” 4. Wind Speed Anemometer 7. A-B-C Switch (not shown) ID code that must match display’s 5.
DISPLAY UNIT 19. SET Button 1. Current Outdoor Temperature For setup preferences. Arrow icon indicates direction 20. – Button temperature is trending. For setup preferences. 2. Sensor Low Battery Indicator 21. SELECT Button 3. Average Wind Speed Press to change the Weather Select Average of all speeds over last (#23) category being displayed.
Install or Replace Batteries 3. Insert 4 x AA batteries into the battery compartment, as shown. AcuRite recommends high quality Follow the polarity (+/-) diagram alkaline or lithium batteries for the in the battery compartment.
Display Unit Setup Set the A-B-C Switch Install or Replace Batteries Locate the A-B-C switch inside the 1. Remove the battery battery compartment. Set the A-B-C compartment cover. switch to A, B or C. You must select 2. Insert 6 x AA alkaline batteries the same letter choices for both the into the battery compartment, display unit and the sensor in order...
Set the Time, Date & Units Press the “SET” button, located on the front of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press and release the “ + “ or “...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents.
3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 2”x4” wood, 3/4” pole, etc. (not included) LEVEL INSTALLATION Use a bubble level (not included) to ensure level installation for accurate wind measurement.
Weather Forecast AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.
Page 12
Weather Select Weather Select displays data including wind chill, dew point, heat index, as well as 24 hour change, and high/low records for outdoor/indoor temperatures, humidity and wind speed. To change the “Weather Select” category shown, press the “SELECT” button on the front of the display. When outdoor/indoor temperature or humidity is chosen, the display cycles through the category’s records in this order: 24 Hour Change (amount the data has changed since 24 hours ago) Today’s HIGH...
Troubleshooting Problem Possible Solution • Relocate the display unit and/or the 3-in-1 sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
Page 14
Date and time will need to be entered after a reset. If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. 3-in-1 Sensor Care Clean the Sensor Clean with a soft, damp cloth.
Specifications Outdoor: -40ºF to 158ºF; -40ºC to 70ºC TEMPERATURE RANGE Indoor: 32ºF to 122ºF; 0ºC to 50ºC Outdoor: 1% to 99% HUMIDITY RANGE Indoor: 1% to 99% 0 to 99 mph; 0 to 159 kph WIND SPEED 330 ft / 100 m depending on home construction materials WIRELESS RANGE 433 mhz OPERATING FREQUENCY...
Customer Support AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www.