Connect The Scanner To Ac Power And Turn On - Polaroid SprintScan 4000 Installer Quick Start Manual

Connect the Scanner to
5
AC Power and Turn On
1
Connect the power cord as shown.
To AC
power
2
Turn the scanner on by pressing the power button (a). Check
the LEDs (b).
The green LED indicates power on. The yellow LED blinks
while the scanner initializes, remaining steady when the
scanner is ready. (The yellow LED also blinks while scan-
ning.)
3
Turn the computer on.
4
Wait for the system to install the scanner driver and display
the normal desktop.
a
b
English
10