Setting Up Vdsl2 Broadband - Huawei HG630B User Manual

4. SETTING UP VDSL2 BROADBAND

If you have an ADSL or fibre broadband connection, skip this step.
To receive a VDSL2 broadband service you must have a VDSL Splitter installed by a
technician as part of your connection agreement
To set up your VDSL2 broadband connection you must use a computer with an
ethernet port and a web browser. Due to the length of the cables supplied, you must
set up close to the VDSL2 connection point. Once broadband is working you can
unplug the ethernet cable and use the Gateway's wireless (Wi-Fi) network.
Dedicated VDSL2 connection point (RJ45)
VDSL2 cable
Large connector (RJ45)
Small connector (RJ11)
Connect the VDSL2 cable to the DSL port on the Gateway and the VDSL2
connection point.
Note: the small connector (RJ11) should go into the DSL port in the Gateway
and the large connector (RJ45) should go into the VDSL2 connection point.
When complete skip to step 6.
5