6. CONNECT YOUR COMPUTER
a. Connect the yellow Ethernet cable into LAN port number 1 (LAN1) in the
back of the Gateway.
b. Connect the other end of the ethernet cable into the ethernet port on
your computer.
Look for this symbol
7. CONNECT TO POWER
a. Plug in the power supply to
the electrical power socket.
Plug the other end of the
power cable into the Power
socket in the Gateway.
b. Ensure the power is turned
on at the wall, and push in the
ON/OFF button on the back of
the Gateway to turn the Gateway on.
on your computer if you are not sure.
On/Off
7