13. FACTORY RESET
WARNING! A factory reset restores the Gateway to the default settings –
all remembered Wi-Fi connections and any user customisations are erased.
Most users should only perform a factory reset when you are directed to
by the broadband helpdesk.
To factory reset your Gateway, do the following:
1.
While the Gateway is turned on, insert a paper clip into the Reset hole in the back,
press down for 8 to 10 seconds, then release.
2. The Gateway will reset and then restart. This can take up to 5 minutes.
3. After a factory reset, you must manually reconnect each Wi-Fi device and redo
any customisations.
13