Setting Up Fibre Broadband; Setting Up Vdsl2 Broadband - Huawei HG630B User Manual

3. settINg UP FIBRe BRoADBAND

If you have an ADSL or VDSL broadband connection, skip this step.
To receive a fibre broadband service, your premises must have a fibre cable connection.
To set up your fibre broadband connection you must use a computer with an
ethernet port and a web browser. Due to the length of the cables supplied, you must
set up close to the fibre optical network termination (or ONT) point. Once your fibre
broadband is working, you can unplug the ethernet cable and use the Gateway's
wireless (Wi-Fi) network.
Fibre Company ONT
POTS1 POTS2 RESET GE1 GE2 GE3
Fibre
Ethernet Cable
Connect one end of the blue tipped Fibre Ethernet Cable into the blue WAN port
in the Gateway and the other end into the port labelled GE1 in the Fibre ONT
(Chorus Fibre ONT illustrated).
When complete, skip to step 6.
4
GE4 POWER

4. settINg UP VDsL2 BRoADBAND

If you have an ADSL or fibre broadband connection, skip this step.
To receive a VDSL2 broadband service you must have a VDSL Splitter installed by a
technician as part of your connection agreement
To set up your VDSL2 broadband connection you must use a computer with an
ethernet port and a web browser. Due to the length of the cables supplied, you must
set up close to the VDSL2 connection point. Once broadband is working you can
unplug the ethernet cable and use the Gateway's wireless (Wi-Fi) network.
Dedicated VDSL2 connection point (RJ45)
Large connector (RJ45)
Connect the VDSL2 cable to the DSL port on the Gateway and the VDSL2
connection point.
Note: the small connector (RJ11) should go into the DSL port in the Gateway
and the large connector (RJ45) should go into the VDSL2 connection point.
When complete skip to step 6.
VDSL2 cable
Small connector (RJ11)
5