3. SETTING UP FIBRE BROADBAND
If you have an ADSL or VDSL broadband connection, skip this step.
To receive a fibre broadband service, your premises must have a fibre cable connection.
To set up your fibre broadband connection you must use a computer with an
ethernet port and a web browser. Due to the length of the cables supplied, you must
set up close to the fibre optical network termination (or ONT) point. Once your fibre
broadband is working, you can unplug the ethernet cable and use the Gateway's
wireless (Wi-Fi) network.
POTS1 POTS2
Connect one end of the blue tipped Fibre Ethernet Cable into the blue WAN port
in the Gateway and the other end into the port labelled GE1 in the Fibre ONT
(Chorus Fibre ONT illustrated).
When complete, skip to step 6.
4
Fibre Company ONT
RESET
GE1
GE2
GE3
GE4
Fibre
Ethernet Cable
POWER