Figure 24. Installing the socket cover
4. Carefully press the other side of the socket cover downward until the socket
Figure 25. Securing the socket cover
5. Carefully check the corners of the socket cover to make sure that the cover is
6. Lower the microprocessor retainer and then lower the lever to secure the
Replacing the primary hard disk drive
This section provides instructions on how to replace the primary hard disk drive.
106
Hardware Maintenance Manual
Note: Your microprocessor socket and socket cover might look slightly different
from the illustration.
cover snaps into place.
secured in the microprocessor socket.
retainer. Make sure the lever is locked into position.
Attention
Do not open your computer or attempt any repair before reading and
understanding the "Important safety information" in the ThinkStation Safety
and Warranty Guide that came with your computer. To obtain a copy of the
ThinkStation Safety and Warranty Guide, go to:
http://www.lenovo.com/support