Menus; Directory; Queue - Auta CENTRAL COMPACT INTEGRADA User Manual

4. Menus.

In the Stand By state, if any of
will appear on the screen. Using
menu.

4.1. Directory:

•
The Directory menu can be also reached directly from the Stand By state pressing
key. This menu allows navigating through the registers of the database and
calling them picking up the handset and pressing OK.
•
The navigation can be achieved using
code using the numeric keypad and then press OK, to access directly to a known
register (if the code is not in the database, the screen will display the message NOT
FOUND).

4.2. Queue:

•
The Queue menu can also be reached directly from the Stand By state pressing
key.
•
The SB stores up to 25 missing calls. These calls can be from flats or switchboards,
but not from panels. Calls are stored according to the order they have been received,
and they won't be stored if the calls are from flats or switchboards which have
already missing calls included in the queue. If there are more than 25 calls in the
queue, the oldest calls will be removed and replaced by the newest ones.
•
If there isn't any call stored in the queue, the screen will display the message
"Empty Queue". The SB will keep the message for 5 seconds and then it will return
to the main menu.
•
The SB shows on screen data corresponding to the flat or switchboard which the
call came from, in a similar manner as they are shown at the Directory. It also
shows in the right side, the order the call has been stored and the whole of calls
queued (see figure 7).
INTEGRATED GUARD UNIT CENTRAL
OK keys is pressed, the menu shown in figure 6
and OK keys it is possible to get to any option of this
auta
Directory
Queue
Settings
Configuration
Main Menu
Select OK Accept
Exit
Figure 6. Switchboard menus.
11
keys. It is also possible to type a call
User Guide