Call Procedure; I Entry An Mmsi - Icom DS-100 (#02) Instruction Manual

DS-100#02-(2) 01.12.13 10:53 AM Page 3 (1,1)
I Entring an MMSI
An ID code of your ship must be
entered before using the unit for
the first time. Only 3 selectable
subjects appear when your ID
code has not been entered yet.
No distress call can be transmit-
ted in the above condition.
<Select a subject>
Entry position/time
Received calls
≈Set up

CALL PROCEDURE

D Entring an MMSI
q Push [CALL], then push [√]
to select 'Set up'.
w Push [ENT], then push [Z]
several times to select
'MMSI entry', then push
[ENT] again.
e Enter the 9 (nine) digit ID
code.
r Push [POWER] on the con-
nected transceiver to turn the
power OFF.
t Push [POWER] to turn the
power ON again. All operat-
ing items/functions can be
selected and use from now
on.
2
<Select a subject>
Brightness
Contrast
MMSI check
≈MMSI entry
<CLR Exit / ENT OK>
<Entry a MMSI >
ID:(9digit)
_____________
Turn power OFF once,
then turn it ON again
3