I Offset Time; I Brightness; I Contrast; I Mmsi Check - Icom DS-100 (#02) Instruction Manual

DS-100#02-(2) 01.12.13 10:53 AM Page 20 (1,1)
4
SET-UP

I Offset time

Local time can be used when
the GPS position data is valid
and offset time is input.
q Push [CALL], then push [√]
one or more times to select
'Set-up', then push [ENT].
w Select 'Offset time', then
push [ENT].
e Push "0; –" or "1; space", then input the time differences.
r Push [ENT] to determine the time or push [CLR] to exit the
Set-up menu.

I Brightness

• Adjusting the brightness
q Push [CALL], then push [√] one or more times to select
'Set-up', then push [ENT].
w Select 'Brightness', then push [ENT].
e Push [Y] or [Z] one or more times (or numeral keys in-
stead) to adjust the brightness.
• Brightness level indication; 1 (dark) to 8 (bright)
r Push [ENT] to determine the brightness or push [CLR] to
exit the Set-up menu.
20

I Contrast

• Adjusting the contrast
<Offset time>
q Push [CALL], then push [√] one or more times to select
—09:30
w Select 'Contrast', then push [ENT].
e Push [Y] or [Z] one or more times (or numeral keys in-
<CLR➝Exit / ENT➝OK>
r Push [ENT] to determine the brightness or push [CLR] to

I MMSI check

Your ID code can be displayed via the set-up menu.
• Check your ID
q Push [CALL], then push [√]
w Select 'MMSI check', then
e Your ID code shows on the
r Push [CLR] to exit the Set-up
'Set-up', then push [ENT].
stead) to adjust the contrast.
• Contrast level indication; 1 (low) to 8 (high)
exit the Set-up menu.
one or more times to select
'Set-up', then push [ENT].
push [ENT].
display.
menu.
<MMSI check>
267350012
<CLR Exit>