I Group Call; I All Ships Call; Call Procedure - Icom DS-100 (#02) Instruction Manual

DS-100#02-(2) 01.12.13 10:53 AM Page 8 (1,1)
2

CALL PROCEDURE

I Group call

q Push [CALL], then push [√]
one or more times to select
'Group call', then push
[ENT].
w Select 'manual entry' to enter
8 digit ID or push [√] to se-
lect the desired ID address.
Then push [ENT].
• 'Select a traffic CH' screen ap-
pears.
e Push [Y]/[Z] to select your
desired traffic channel from
the list. Then push [ENT].
r Push [CALL] and [ENT] si-
multaneously to transmit an
Individual call.
• Push [CLR] to stop the call.
8
<Select a group>
≈Manual entry
ICOM
<CLR Exit / ENT OK>
<Input an address>
ID:(8digit)
0
<CLR Exit / ENT OK>

I All ships call

q Push [CALL], then push [√]
one or more times to select
'All ships call', then push
[ENT].
w Select the desired category,
then push [ENT].
e To select desired traffic
channel push [BS] twice and
enter channel number.*
r Push [CALL] and [ENT] simultaneously to transmit an All
ships call.
• Push [CLR] to stop the call.
* Traffic channel automatically defaults to channel 16.
<Select a category>
Safety
≈Urgency
<CLR Exit / ENT OK>