I Entry Position/Time - Icom DS-100 (#02) Instruction Manual

DS-100#02-(2) 01.12.13 10:53 AM Page 6 (1,1)
2
CALL PROCEDURE
NOTE:
• 'nature of distress' will be valid for 10 min. until a distress
call transmits. After 10 min. it reverts to an undesignated dis-
tress.
• Distress call repeats every 3.5–4.5 min., until receiving an
'acknowledgement'
• Beep (Pi,Pi) sounds with the max. volume every 1 sec. until
acknowledgement is received.
• Push clear to cancel a distress call prior to receiving and an
acknowledgement.
The 'cancel acknowledgement' is automatically transmitted when
the [CLR] key is pushed.
6

I Entry Position/Time

When no GPS receiver is connected, the 'Entry
Position/Time' appears at the top of the subject menu.
q Push [CALL], then push [√] to select 'Entry Position/Time'.
w Push [ENT], then enter the latitude data with the key pad.
e Push [Y]/[Z] to select N; north latitude or S; south latitude,
then push [ENT].
• Push [Ω]/[≈] to move the cur-
sor then push [Y]/[Z] to correct
the data
• Push [CLR] to Exit the menu.
• Push [A/a], the push [ENT] to
enter 'Null data'.
r Enter the longitude data with
the key pad.
t Push [Y]/[Z] to select E;
east longitude or W; west
longitude, then push [ENT].
• Push [Ω]/[≈] to move the cur-
sor then push [Y]/[Z] to correct
the data
• Push [CLR] to Exit the menu.
• Push [A/a], the push [ENT] to
enter 'Null data'.
<Input a position>
Latitude
° 'N
Longitude
° 'E
<A/a Null data>
<CLR Exit / ENT OK>
<Input a Time>
UTC :
<A/a Null data>
<CLR Exit / ENT OK>