Kenmore 385.19005 Owner's Manual page 34

i_J Raise and release foot, and re-attach it on left-hand side
of pin..
Take the upper fabric layer and lay it flat over the zipper..
Starting just below zipper bottom stop, sew across fabric
to about 3/8-to 1/2" distance from the basting stitch line
Turn fabric 90 ° and sew a seam the entire length of
zipper tape° Before reaching pull-tab, stop the machine
with needle in fabric and raise the foot. Use seam ripper
to open a few inches of basting stitch, then unzip a few
inches to clear a path for the stitch.. At the end of the
zipper tape, sew in reverse a few stitches to lock.
Once both sides of zipper are sewn, use seam ripper to
open the basting stitch
f
J
29