Lexmark 8300 Series Service Manual page 24

4419-X6X
Code Name
1207 Paper System
Error
1208 Incorrect Home
Position
1209 Flash
Programming
Error
1210 Mode Select
1211 USB Error
2-4
Service Manual
Description
A paper system error
control failure was
detected.
The All-In-One is
unable to locate print
cartridge home
position.
Cannot program Flash
memory
An invalid print mode
was selected in print
command.
An error was detected
in USB hardware, or
invalid results occurred
in USB code.
Action
Clear the paper path.
Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
Unplug the All-In-
One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on.
Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
USB cable. If the
error continues,
replace the system
board.
Select a valid print
mode.
Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
USB cable. If the
error continues,
replace the system
board.