Scan And Copy Quality Service Check - Lexmark 8300 Series Service Manual

Scan and copy quality service check

Unit/Problem
Scanned images
have:
• Blank pages
• Checkerboard
pattern
• Distorted
graphics or
pictures
• Missing
characters
• Faded print
• Dark print
• Skewed lines
• Smudges
• Streaks
• Unexpected
characters
• White lines in
print
Action
If the scanner glass is dirty, gently wipe it with a clean,
lint-free cloth dampened with water.
Make sure all ink or corrective fluid is dry before
placing a document on the scanner glass.
Make sure the document or photo is loaded correctly in
the ADF or on the scanner glass.
Check the ink levels, and install a new print cartridge if
necessary.
To adjust the Brightness setting:
1. Load the document face down on the scanner glass.
2. From the control panel, press Copy Mode.
3. Press or
Darker is highlighted.
4. Press or
5. Press .
repeatedly until Lighter /
to lighten or darken the copy.
Diagnostic information
4419-X6X
2-23