Bobbin Winding; Removing Bobbin Case - Kenmore 385.15512 Owner's Manual

Bobbin Winding
o Removing bobbin case
Remove the extension table from the machine by pulling it to
the left_ Open the shuttle coverOby pulling down the
embossed part on the left of the cover,
Raise the needle to its highest position by rotating the
handwheel toward you
(_) Shuttle cover
(_) Bobbin case
To remove the bobbin case(_)from the shuttle, pull open the
latch of the bobbin case, Pull the bobbin case straight out of
the shuttle,
, Bobbin winding
[] Release the clutch by pulling out the handwheel This
will stop the needle from moving while you wind the
bobbin
f
[]
k.
[] Draw thread from spool
[] Guide the thread around the thread guide
[] Thread through the hole in the bobbin from the inside to
the outside
[] Put the bobbin on the bobbin winder spindle
f
[]
[]
[]
18