C Troubleshooting - Holm HOLMFIR User Manual

Troubleshooting
Appendix C
Troubleshooting
Problem
The status field in HOLMFIR says:
No compatible DSPre found
HOLMFIR cannot control the
DSPre volume and source
There was a powerfailure when I
was uploading filters to the DSPre,
which is not responding now.
The DSPre is powered on, but
there is no text in the display
HOLM Acoustics
Solution
1. Make sure that a USB cable is connected between
the DSPre and the computer
2. Turn on the DSPre
3. Restart HOLMFIR
1. Disconnect the USB cable to the DSPre
2. Close the HOLMFIR application
3. Connect the USB cable to the DSPre
4. Start HOLMFIR
1. Perform the upload again
1a. Turn off the DSPre and turn the DSPre on again
1b. Find the remote control and adjust the dimming
61 of
HOLMFIR User Guide v0.4.4
65