Verification; Limit The Maximum Gain - Holm HOLMFIR User Manual

Driver Correction - Correcting a Bass/Subwoofer (DSPre-2,3-way)
Important Note
You can correct other drivers in your system, but alignment of the drivers (Chapter
Automatic Driver Alignment) is necessary after uploading corrected filters.
12.3.1 Verification
After uploading the filter with corrections you will have a DSPre, which corrects your driver
to have a perfect impulse response, which can be verified simply by making a measurement
without moving the microphone:
12.3.2

Limit the Maximum Gain

Under 'Futher Options' the maximum gain can be adjusted
HOLM Acoustics
54 of
11
HOLMFIR User Guide v0.4.4
65