Table of Contents
Advertisement
Control the DSPre
Chapter 6
Control the DSPre
You can to some extend customize and control the DSPre from HOLMFIR. These settings
can of course only be controlled from HOLMFIR when the DSPre is turned on and con-
nected via the USB-cable to the computer. Volume and source can be selected via the
DSPre remote-control, the DSPre frontpanel or HOLMFIR:
Note that when the DSPre has been turned off, the current source is remembered, but the
volume is reset to the moderate value 15.
6.1
Source Text in the Display
The source text can be specified with 13 characters. The source text is static - hence will
be remembered when the DSPre is turned off.
HOLM Acoustics
24 of
HOLMFIR User Guide v0.4.4
65
Advertisement
Table of Contents
