Introduction to Advanced Mode
Chapter 8
Introduction to Advanced Mode
In 'Advanced Mode 'you have an outstanding opportunity to implement corrections and
fine tune your speakers.
The response of your system is measured with a calibrated microphone, and with a known
response you can to a far extend correct for the imperfectness in your system.
Switch to Advanced Mode
Switch to 'Advanced Mode 'from the options menu: 'Options'
The changes/configurations made in 'Advanced Mode 'are still in effect (but hidden) when
switching back to 'Basic Mode '.
8.1
Functionality
The functionality achieved in 'Advanced Mode 'is:
Automatic gain-level adjustment
Automatic time-align adjustment
Linear frequency response (Amplitude vs. frequency)
Correction of Q-Damping factor for the bass-driver
Linear phase response
8.2
Configuring the DSPre with Full Correction
The chapters 10,
fastest way of configuring the DSPre with full correction you should:
1. Correct each driver in the system (Chapter
2. Align the drivers (Chapter
3. Verify the full setup (Chapter
HOLM Acoustics
11
and
12
are increasing in complexity and concepts, but if you want the
11
'Automatic Driver Alignment')
10
12
'Driver Correction')
'Control Measurements')
'Advanced Mode'.
HOLMFIR User Guide v0.4.4
32 of
65