Control Measurements
Chapter 10
Control Measurements
A cornerstone in the HOLM Acoustics filosofy is that you must have the oppertunity
to verify your setup. In the 'Control measurements' tab you can verify your setup and
compare settings.
10.1
Target Frequency & Impulse Response
Without making a measurement HOLMFIR shows the target response as a frequency
response and impulse response:
If the amplifier, speaker, room and microphone was perfect you would measure this response
- hence the name 'target'.
HOLM Acoustics
37 of
HOLMFIR User Guide v0.4.4
65