Dspre-1-Way Setup - Holm HOLMFIR User Manual

Quick Start - DSPre-1-way Setup
2.3

DSPre-1-way Setup

In a DSPre-1-way setup the DSPre basically acts as a pre-amplifier with digital correction
and equalization options.
To use the DSPre-1-way setup you need:
1. A DSPre 1
2. A stereo amplifier (or two mono amplifiers)
3. Two full range speakers
4. Signal and speaker cables
5. A computer running Windows XP or Vista (only needed to configure the DSPre)
Connect the Cables
Connect the cables as shown in the diagram below.
Input sources available: 1 USB, 2 analog and 5 digital
HOLM Acoustics
6 of
HOLMFIR User Guide v0.4.4
65