Table of Contents
Advertisement
Quick Start - DSPre-2-way Setup
2.4
DSPre-2-way Setup
In a DSPre-2-way setup the DSPre basically acts as a pre-amplifier and active crossover
with digital correction and equalization options.
To use the DSPre-2-way setup you need:
1. A DSPre 1 with 2 output modules
2. Two stereo amplifiers (Can be of different kind)
3. Two speakers with two inputs (Bi-wire - with or without analog crossovers)
4. Signal and speaker cables
5. A computer running Windows XP or Vista (only needed to configure the DSPre)
Connecting the cables
Connect the cables as shown in the diagram below.
Input sources available: 1 USB, 2 analog and 5 digital
HOLM Acoustics
8 of
HOLMFIR User Guide v0.4.4
65
Advertisement
Table of Contents
