Overcasting Sti; Multiple Zigzag - Kenmore 15358 Owner's Manual

Overcasting Stitch
_1_ Stitch pattern selector: 3
_2_, Presser foot: Zigzag foot
_ Needle thread tension: 1 to 4
:4_Stitch length: 1-2
This stitch is useful in garment construction, and in finishing
the raw edges of any sewing project.
Start overcasting about 1/8"(0.3 cm) inside the raw corner
of a fabric. The right tip of the stitch should just clear the
row edge.
f
x J
s'\
J
Multiple Zigzag Stitch
_1_ Stitch pattern selector: 4
_2_Presser foot: Zigzag foot
_3} Needle thread tension: 1 to 4
_4_ Stitch length: 0.5 - 4
• Seam finishing
This stitch is used
synthetics and _rics that tend to
Place al.6cm(_8 seam.
Trim the seam after sewi
INOTE Be careful not to cut the stitches.I ......
I 1
• Mending
Position the tear under the needle, so that the stitch
catches both sides.
"2'-_
50