Kenmore 15358 Owner's Manual page 64

SECTION V. UTiLiTY AND DECORATIVE
STITCHES
Blind Hem Stitch
_1_ Stitch pattern selector: 5 or 6
_2_Presser foot: Zigzag foot
(3_ Needle thread tension: 2 to 4
_4_ Stitch length: 1-3
',,:!J Lightweight fabric
_._,,,_2_ Heavyweight fabric
_3j,Wrong side (Bottom side) of fabric
On heavyweight fabrics that ravel, the raw edge should be
overcast first. Then fold the hem, as illustrated, leaving
1/4"(0.7 cm) of the hem edge showing.
Position the fabric, so that the needle at its leftmost
position just pierces the edge of the fold.
After hemming is completed, press together both sides of
the finished hem. The top side of the fabric should show
only the blind stitches.
f
\ J
t\lj
Ix j'
Lace Work
_1_ Stitch pattern
_2_, Presser foot: tzag foot
_3_, Needle thread ter
(4_Stitch length: 1-3
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more elegant
when trimmed with lace.
Fold the raw edge of the fabric at least 5/8" (1.5 cm). Place
lace underneath and topstitch with blind hem stitch. Trim
excess fabric close to stitching.
J
52